Buying guide
How to choose a UHF radio
A UHF CB radio keeps you in touch with your convoy, trucks and other road users where there's no phone signal. No licence application is needed, but there are rules on channels and power.
- In-car or handheld
A fixed in-car radio runs at up to 5 watts through a roof or bar-mounted antenna. A handheld is handy outside the vehicle but has less range.
- The antenna matters
Low gain (around 2.1 dBi) suits hilly country, mid gain (5.1 to 6.6 dBi) suits suburbs and general touring, and high gain (8.1 dBi) suits flat outback (GME).
- Know the emergency channels
Channels 5 and 35 are the emergency channels, and no tones may be used on them. Channels 22 and 23 are for telemetry only.
- Repeaters
Repeaters extend your range: their outputs are channels 1 to 8 and 41 to 48, and you transmit on 31 to 38 and 71 to 78.
Choosing an Antenna Bracket
Location drives everything. A bracket that puts your antenna high and clear of the bodywork helps your signal, but you also need to think about clearance for garages, car parks and tree branches. Bull bar tabs, bonnet and boot lips, and mirror arms are the common mounting points, and each one suits a different bracket style.
Build quality matters because the bracket carries constant vibration on corrugated roads. Stainless steel resists rust and holds up over the long term, and a fold-down bracket is handy if you regularly park somewhere with limited height. Make sure the bracket thickness and hole pattern suit your antenna base, and route the cable so it cannot chafe on bodywork.
Related categories
Common questions
Do I need a licence for a UHF radio?
No application or fee. UHF CB radios are covered by the ACMA's CB class licence, so you just follow its rules.
What are the emergency channels?
Channels 5 and 35. In a real emergency you may use any channel to get help (ACMA).
How powerful can my radio be?
Up to 5 watts of transmitter power (CB Class Licence 2025).
Which antenna should I choose?
Match the gain to where you drive: about 2.1 dBi in hills, 5.1 to 6.6 dBi for suburbs and general country, and 8.1 dBi for flat open country (GME).
How do repeaters work?
A repeater listens on one channel and re-broadcasts on another from a high point, extending your range. Repeater outputs are channels 1 to 8 and 41 to 48; you transmit on the matching input, 31 to 38 or 71 to 78. Running your own repeater needs an apparatus licence (ACMA).
