Airbag Man CR5119HP rear helper kit — Nissan Patrol — image 1

Airbag Man Rear Airbag Helper Kit — Nissan Patrol Y62 (04/2010–2026)

$405.00

Call 03 9808 8966

Rear coil-helper airbag kits for the supplier-listed Nissan Patrol Y62, including HBMC suspension applications. Choose standard height, the listed 50 mm raised setup, or the separately specified 590 mm-plus rear-height setup; then choose the correct pressure rating for the load and suspension.

Choose the correct kit

Part number Suspension / kit type Pressure Kit price inc GST
CR5119 Standard-height Y62 rear coils; also suits HBMC 5–30 PSI $405.00
CR5119HP Standard-height Y62 rear coils; HP sleeves; also suits HBMC 5–60 PSI with HP sleeves $480.00
CR5120 Y62 rear coils raised 50 mm; also suits HBMC 5–30 PSI $410.00
CR5120HP Y62 rear coils raised 50 mm; HP sleeves; also suits HBMC 5–60 PSI with HP sleeves $485.00
CR5172 Raised Y62 rear coils; 590 mm+ hub-centre to wheel-arch height; confirm measured fitment 5–30 PSI $405.00
CR5172HP Raised Y62 rear coils; 590 mm+ hub-centre to wheel-arch height; HP sleeves; confirm measured fitment 5–60 PSI with HP sleeves $480.00

Vehicle fitment

  • Nissan Patrol Y62, supplier application April 2010–2026
  • Rear independent coil suspension; the listed kits also suit HBMC suspension models

Check before ordering

  • Confirm Y62 chassis and current suspension. Supplier application starts April 2010; year alone does not establish compatibility with a different Patrol generation. Warrior has its own supplier application and must be checked separately.
  • CR5119 / CR5119HP are standard-height kits. CR5120 / CR5120HP are listed for 50 mm raised suspension. CR5172 / CR5172HP are also listed raised but specifically require a rear height measurement of 590 mm or more, measured vertically from wheel hub centre to wheel arch. These raised families are not interchangeable on lift height alone.
  • The 590 mm-plus choices require suspension and measured-height confirmation before online purchase. Have our team confirm the correct kit if the vehicle is sagged under load or the intended ride height differs from its current position.
  • Airbag Man describes up to 180 kg of suspension assistance for standard-pressure kits and up to 280 kg for HP kits in this independent-rear-suspension application. These figures are suspension assistance, not additional legal payload or GVM. Greater load support may require uprated coil springs.
  • Airbag Man recommends HP for heavy loads and most towing applications, and for the 180–280 kg assistance range. Standard kits operate at 5–30 PSI; HP kits at 5–60 PSI with the sleeves fitted.
  • Confirm spring, shock, exhaust and wheel changes with the installer. Keep minimum air pressure and follow the selected kit instructions. Airbags do not increase legal payload, GVM, axle or towing ratings.

Features

  • Six part numbers distinguish suspension height and pressure requirements
  • Suitable for the listed HBMC suspension applications
  • Manual inflation for adjustable rear load support
  • HP sleeves for the specified 5–60 PSI operating range
  • Dedicated upper/lower supports and airline fittings as specified in each kit

What is included

  • Rear coil-helper airbag kit for the selected part number
  • High-pressure sleeves on the HP options
  • Airline tubing, manual inflation valves and installation fittings/protectors as specified in the selected kit instructions

A compressor, air tank, wireless controller, replacement springs and installation labour are not included. Vehicle photos and diagrams in the manufacturer’s instructions illustrate installation and are not additional included products.

Specifications

  • Position: rear axle
  • Inflation: manual valves in the base kit
  • Standard-height choices: CR5119 / CR5119HP
  • Raised 50 mm choices: CR5120 / CR5120HP
  • Raised, 590 mm+ measured rear height: CR5172 / CR5172HP; confirmation required
  • Rear height measurement: Vertical wheel hub centre to wheel arch
  • Pressure ranges: 5–30 PSI standard; 5–60 PSI HP with sleeves
  • Airbag warranty: manufacturer limited lifetime warranty, subject to terms; do not assume the same cover applies to every fitting or accessory.

Fitting and air-control options

The displayed price is for the selected kit only. Ask our Burwood team about installation or a compatible compressor/control package. Airbag Man offers manual, wireless and automatic air-control systems; we will confirm compatibility and provide a price for your vehicle and chosen setup.

Free pickup can be arranged from 88–94 Highbury Road, Burwood VIC 3125. Contact us for a delivery quote before ordering for shipment.

Manuals and fitting instructions

Follow the selected kit’s operating pressures and installation instructions. Brake/stability systems, suspension travel, airbag clearances and aftermarket modifications must be checked by the installer. These helper kits do not increase the vehicle manufacturer’s load limits.