Hardkorr Extention Cable Kit (Orange 4-Pin Plugs)

Hardkorr Extention Cable Kit (Orange 4-Pin Plugs)

$25.00

Call 03 9808 8966

Stretch out your camp lighting setup.


This extension cable kit gives you additional flexibility when setting up your Hard Korr orange & white camp lights. The kit contains a 3-way splitter cable, a 3.5m extension cable and 2 x 2.5m extension cables. The cables have 4-pin DC (orange) plugs.

Which cable kit do I need?


This kit is NOT suitable for use with our white-only LED camp lights. You will need a White LED Extension Cable Kit instead.

If you are using this cable kit with our orange & white or tri-colour LED camp lights, items from this kit can be used anywhere after the dimmer switch. If you need to place extension cables or splitters before the dimmer, our Extension Cable Kit (Black DC Plugs) is the correct product. This is because the orange/white and tri-colour dimmer switches have a standard DC (black) input plug, and a 4-pin DC (orange) output plug.

Specifications








Cable type Double insulated with IP68 waterproof DC connectors
Cable gauge 3 x 20AWG (0.5mm2)

Pack Contents











1x 3.5m extension cable with 4-pin DC plugs
2x 2.5m extension cables with 4-pin DC plugs
1x 3-way splitter with 4-pin DC plugs

Know before you buy

Before you buy driving lights

Extra driving lights are legal in Victoria, within limits on how many you fit, where they go and how they're switched. Here's how to choose a set that's bright where you need it and road legal.

  1. Four extra, at most

    You can fit up to four additional driving lights, and an LED light bar counts as one of them (VSI 8). Pairs must be at the same height and face forward.

  2. Wired to high beam

    Driving lights must only come on with your high beam and go off with it. Dip within 200 m of oncoming traffic or a vehicle you're following.

  3. Where they go

    A single light bar must sit on the centreline. Lights can go above the roof line if they're in the front half of the vehicle, and on a bull bar they must sit behind its front face.

  4. Spot, flood or combo

    A spot beam reaches far down the road, a flood lights a wide area close in, and a combo does some of both. Lux at a distance tells you more about reach than total lumens (Narva).

Common questions

Are light bars legal in Victoria?

Yes. A light bar counts as one of up to four additional driving lights. It must be white, face forward, sit on the vehicle's centreline if it's a single bar, and only work with high beam (VSI 8; Road Safety (Vehicles) Regulations 2021).

How many driving lights can I fit?

Up to four additional lights, light bars included (VSI 8).

Do they have to be wired to high beam?

Yes. In Victoria, driving lights may only switch on when your high beam is on and must turn off with it (VSI 8).

Are amber or coloured covers legal?

Not on the road. Lamp covers must be clear, untinted, uncoloured and clean (VSI 8).

Do I have to cover my lights when I'm not using them?

There's no Victorian rule that says you must cover them. What matters is that they only work with high beam and that you dip them for other road users.

Lux or lumens: which matters?

Lumens measure the total light a lamp puts out. Lux measures how much light lands on the road at a distance, so the distance at which a beam still gives 1 lux tells you more about how far it reaches (Narva).

Keep going

Driving LightsDriving lights64 in range Light BarsLED light bars24 in range Camp & Work LightsFor camp and work39 in range Switches & AccessoriesSwitches and wiring17 in range Bull BarsSomewhere to mount them136 in range