Safari V-SPEC Snorkel SS146HFE — Toyota Hilux 167 Series 3.0L 5L-E Diesel
$513.01
The Safari V-SPEC SS146HFE is a vehicle-specific raised air intake for Toyota Hilux 167 Series 3.0L 5L-E Diesel. This application uses 3.0L 5L-E diesel. It routes air to the vehicle’s intake system from an elevated air ram, helping reduce exposure to dust and rainwater at the original intake position.
Vehicle fitment
- Toyota Hilux — 167 Series / LN167 / LN172 (2000–2005)
Engine: 3.0L 5L-E diesel. Match the build date, engine and body before ordering.
Important fitment notes
- The portal dates this 5L-E application from September 2000; confirm engine and exact build rather than relying only on the series start year.
Features
- Designed, moulded and manufactured in Australia.
- Elevates the intake opening to reduce exposure to dust and splash at the original intake location.
- Intake passage developed for the airflow requirements of the specified engine.
- Water-separating air ram helps discharge rainwater from the intake stream.
- UV-stabilised snorkel body and air ram designed for outdoor durability.
- Vehicle-specific fitting guide and template support accurate installation.
Specifications
- Part number: SS146HFE
- Range: Safari V-SPEC
- Engine/application: 3.0L 5L-E diesel
Kit components
| Item | Part | Description | Quantity |
|---|---|---|---|
| 1 | 315-133-200R | BODY - SNORKEL | 1 |
| 2 | 000-135-800 | 3 ½” AIR RAM ASSEMBLEY | 1 |
| 3 | 315-032-400 | BRACKET - UPPER MOUNTING | 1 |
| 4 | 000-002-100 | BOLT - HEX 6.0mm x 1.0mm x 14mm | 3 |
| 5 | 000-951 | SCREW - S/T 4.2mm x 13mm | 3 |
| 6 | 000-960 | PLASTIC CLIP - PLASTIC | 3 |
| 7 | 315-024-000 | HOSE - AIR ENTRY | 1 |
| 8 | 000-110 | STUD - S/S 8mm x 1.25mm x 25mm O/L | 6 |
| 9 | 000-311-300 | WASHER - BODY 8mm x 30mm | 6 |
| 10 | 000-205-300 | NUT - NYLOC 8mm x 1.25mm | 6 |
| 11 | 000-908 | CLAMP - HOSE 70/90 mm | 2 |
| 12 | 315-025-500 | SLEEVE - AIR INLET (S/S) | 1 |
| 13 | 315-017-200 | TEMPLATE | 1 |
| 14 | 000-914/B | HOSE CLAMP - SIZE 56 (BLACK) | 1 |
Fitting information
The displayed price is for the snorkel kit. Contact Complete 4x4 on 03 9808 8966 for fitment advice or installation at 88–94 Highbury Road, Burwood VIC 3125. A snorkel does not increase the vehicle manufacturer’s stated wading depth.
Manufacturer instructions
Know before you buy
Before you buy a snorkel
A snorkel moves your engine's air intake up to roof height, above the dust and spray. It's a precise, vehicle-specific fit, and it won't make your vehicle waterproof.
- Made for your engine
Snorkels are made for a specific model and engine, so a Prado diesel and a Prado V6 take different kits. Check the listing against your vehicle and engine.
- Not waterproofing
A snorkel raises the air intake. It doesn't seal the engine bay or electrics, and your vehicle maker's wading depth still applies.
- Breathers too
Factory diff and gearbox breathers often sit low. Many owners raise them at the same time as fitting a snorkel.
- Which way to face it
The air ram separates rain from the air coming in. Turning it backwards in heavy dust can reduce airflow (Safari).
Common questions
Is a snorkel worth it if I don't cross water?
Many owners fit one for dust. The intake sits at roof height, above the dust thrown up on gravel roads and behind other vehicles.
Can I drive through deeper water with a snorkel?
No. A snorkel moves the air intake, but it doesn't waterproof the engine bay, electrics or driveline. Your vehicle maker's wading depth still applies.
Are factory raised air intakes the same as a snorkel?
No. Safari notes that factory raised intakes are not watertight.
Do I need diff breathers?
Factory diff and gearbox breathers are often poorly located for water crossings (ARB). A breather kit raises them so water isn't drawn in as the housings cool.
Should I use a pre-cleaner sock?
Only on dusty tracks below 40 km/h, cleaned daily, and not on the highway (Safari).