Collection: Towbars & Towing

About this range

Towing safely starts with the right equipment matched to your vehicle. Our Towbars and Towing range brings together towbars and towing accessories for 4x4s, utes and SUVs, whether you are hauling a box trailer around town or a van across the country.

Buy online with Australia-wide shipping, or have your setup supplied and fitted at our Burwood workshop in Melbourne's east. Call 03 9808 8966 to check what suits your vehicle.

Ask our team about Towbars & Towing

Tell us about your vehicle and the setup you have in mind. Send an enquiry or call 03 9808 8966 for product advice and a fitting quote.

0 products

No products found
Use fewer filters or remove all

Buying guide

Towing set-up explained

Safe towing comes down to a few numbers on your trailer and your vehicle. Here's how they decide what brakes, controller and towbar you need.

  1. GTM decides the brakes

    Trailer brake rules use the trailer's GTM (the mass on its axles), not its ATM. Up to 750 kg GTM, no brakes are needed. Over 750 kg the trailer needs brakes, and electric brakes need a controller in the vehicle.

  2. Over 2,000 kg

    All wheels must be braked, with a breakaway system that applies the brakes immediately and holds them for at least 15 minutes if the trailer comes off (VSB 1).

  3. The lowest rating wins

    Your towing limit is the lower of the towbar's rating and the vehicle's rating. The tow ball weight counts towards your vehicle's GVM.

  4. The right plug

    On a 7-pin plug, pin 5 is for brakes only. If the van needs power for a fridge, use a 12-pin plug or an Anderson connection.

Choosing a towbar and towing setup

Start with your vehicle's numbers. The handbook and compliance plate list maximum braked and unbraked towing capacity along with the towball download limit, and your towbar needs a rating to match what you actually plan to pull. If a caravan or loaded tandem trailer is in your future, it is worth fitting a bar rated for it now rather than upgrading later.

Then think about everything around the bar. Trailer wiring has to match your plug type, trailers running electric brakes need a brake controller, and towing mirrors earn their place once a caravan blocks your view. Sorting the whole package at once is easier than chasing parts later, and our Burwood team can plan the lot around your vehicle.

Related categories

Common questions

When does my trailer need electric brakes?

Brakes are required once the trailer's GTM is over 750 kg. Over 750 kg the brakes must work from a controller in the vehicle unless they are override (over-run) brakes, which are only allowed up to 2,000 kg. Over 2,000 kg every wheel must be braked, plus a breakaway system (VSB 1).

What's the difference between ATM and GTM?

ATM is the trailer's total mass when loaded, including the weight on the tow ball. GTM is the mass carried by the trailer's own axles. ATM minus GTM is the tow ball download. Both are maker ratings, not weighbridge readings.

Proportional or user-controlled brake controller?

A proportional controller brakes the trailer in step with the vehicle and suits most on-road towing. User-controlled (time-based) braking gives you manual control, which Redarc recommends for sand and steep descents.

What is a breakaway system?

A battery-powered system on the trailer that applies its brakes if it separates from the vehicle. It's required over 2,000 kg and must hold the brakes for at least 15 minutes (VSB 1).

How much tow ball weight should I have?

Guidance ranges from about 5 to 10 percent of the trailer's weight. It counts towards your vehicle's GVM and must stay within the towbar's and vehicle's tow ball limits.

How many safety chains does my trailer need?

One chain built to AS 4177.4 up to 2,500 kg ATM, and two above that (VSB 1).

Keep going